NCI Packaging Shop
Search:   Keyword/s: Volume: Adv. Search

Username:

Password:



Forgotten your password?

new member signup
 
 

 
Child resistant Screw Cap that meet Australian Standards for the prevention of opening by children
 
Dangerous Goods Defined by Australian Standards and separated into class (call for more information or containers that meet your specific product)
 
HACCP Certification used throughout the food industry. Ensures that product are suitable and safe for use in the manufacturing, packaging, transportation, etc of food products.
 
Tamper Evident (T/E) Designed in such a way that it is obvious when it has been opened or tampered with
 



Bead A convex or concave strengthening rib formed integrally for strengthening purposes
 
Coatings Coatings Applied to tinplate to enhance performance or appearance 
 

Lacquered Inside

 Suitable for water based products
Lacquered Outside To enhance appearance and performance
Plain Inside Suitable for oils and solvent based products
Plain Outside Suitable for indoor uses
Varnished Outside Gloss protective finish
White Outside Coated white for a clean finish

Drum Container with a top and bottom both permanently joined (seamed) with either a screw cap or press in fitting (see REL & Stoltz fittings)
 
Pail A cylindrical container without a top ring, typically with a capacity of more than 10 Litres
 
Parallel-Sided Drum with the top being the same or a slightly smaller diameter than the bottom end
 
Tinplate Steel with a thin coating of tin to protect the steel
 
Tapered Pail or drum with bottom end of smaller diameter than the top
 




Bericap A brand of plastic fitting including screw caps, pull up pourers etc that clip into a dedicated feature on the top of a drum
 
Bung Fitting in the side of a drum that allows a tap to be fitted for the dispensing of liquid
 
Full Friction Lid with single seal
 
Locking Ring Metal strap with lever that secures NatSeal and ReSeal lids to pails (see NatSeal & ReSeal)
 
Locking Ring Arrow Plastic T/E device for locking rings
 
LokSafe™ Enhanced tripletite lid with greater lid retention, for 224mm diameter cans
 
NatSeal & ReSeal Lid attached over the top of a pail and secured with a Locking Ring, approved for Dangerous Goods when used with approved pails
 
Pourer Plastic insert that fits into a drum under a screw cap to assist in dispensing liquid
 
Pull up pourer Plastic screw cap with integrated pourer
 
REL fitting A brand of plastic fitting including screw caps, pull up pourers etc that clip into a dedicated feature on the top of a drum
 
RingSeal™ Metal lid with an integrated plastic collar to attach lid to pail, easy to apply and for customers to remove and replace
 
Safe-Seal™ Dangerous Goods version of a lug lid, when used with approved pails
 
Screw Cap Metal or plastic cap that is screwed onto a container, usually a drum
 
Security Clips Can be applied to tripletite or doubletite cans for extra lid retention, often used after tinting
 
Slip Lid Lid slips over the top of can, not air tight
 
Snap in Flange Plastic bung that is punctured when a tap is fitted, does not require to be removed
 
Stoltz A brand of plastic fitting including screw caps, pull up pourers etc that clip into a dedicated feature on the top of a drum
 
Sure Seal Bung Tinplate bung that is punctured when a tap is fitted, does not require to be removed
 
Tripletite Lid with triple seal (most air tight seal) and with very good lid retention
 




Pail A cylindrical container that has a greater wall thickness that than a tub and therefore is more robust and is more resistant to damage
 
Tub An open top, flat-bottomed vessel, usually round and typically wider than it is deep